ASSEMBLY INSTRUCTIONS
PAGE 2 OF 2
STEP 4
STEP 5
Palm
G
H
6
D
STEP 6
STEP 7
Screw 2 center support leg [G] into corresponding holes on
center rail [D]. Insert center rail [D] into its corresponding
brackets on the headboard [A] & footboard [B].
A
D
Attach 2 center support [E]
to side rail [C] with 4 screw
[5]. Repeat the same
procedure to secure the
other side.
C
5
E
Insert bed slats [H] into bed slat side fitter [6] & fix it to the
corresponding holes on the side rails [C].
H
H
7
Slot first slat [H] into bed slat center
fitter [7] & insert second bed slat [H]
into bed slat center fitter [7] on
opposite side. Attach bed slats side
fitter [6] to bed slat before pressing the
caps into corresponding holes on
center rail [D] & side rails [C].
1.
Note : When moving the bed
position please ensure center
support legs are vertically aligned
to avoid any broken problems.
2.
Note : Hardware may loosen over
time. Periodically check that all
connections are tight.
Your bed is assembly complete.