EEI-3579 CHAIR
Customer Service 609-256-9000︱www.modway.com
Page 2 of 2
STEP 1:
1. Please put
Chair Body (1)
upside down on a carpeted or padded surface.
2. Open the zipper on the bottom of the
Chair Body (1)
and take out the 4 pieces of
Legs (2)
and hardware bag.
3. Attach 1 piece of
Leg
(2)
to the corner of
Chair Body (1)
by using 1 piece of
Bolt (A)
and 1 piece of
Bolt (B)
with 2 pieces of
Flat
Washers (C)
as shown in
Figure.
4. Use
Allen Wrench (D
) to tighten
Bolt (A)
and
Bolt (B).
Don’t fully tight
Bolt (A)
and
Bolt (B)
.
5. Repeat the same steps for the other 3 pieces of
Legs (2)
as shown.
6.
When all Legs
are fixed, please fully tighten all
Bolts (A)
and
Bolts (B)
.
STEP 2 :
Close the zipper on the bottom of
Chair Body (1)
. Carefully turn over the assembled Chair.
Assembly is complete. Your Chair is ready to enjoy now!
Note:
Please pay attention to the
different bolts size for different location.
