EEI-3578 BENCH
Customer Service 609-256-9000︱www.modway.com
Page 2 of 3
STEP 1:
1. Take out 2 pieces of
Legs #2 (2)
, 2 pieces of
Legs #3 (3)
and hardware package in the carton..
2. Please put
Bench Body (1)
upside down on a carpeted or padded surface by two adults.
Open the HOOK & LOOP on the either side at the bottom of the
Bench Body (1)
.
+ Hardware
STEP 2:
1. Please note there are labels on the corners of
the
Bench Body (1)
and each leg, please make sure the each
leg match to the right location.
2.Attach 1 piece of
Leg #2 (2)
to the corner of
the
Bench Body (1)
by using 2 pieces of
Bolts (A)
with 2 pieces
of
Flat Washers (B)
as shown.
3. Use
Allen Wrench (C
) to tighten
Bolts (A).
Don’t fully tight
Bolts (A)
.
4. Repeat the same steps for the other 3 pieces of Legs as shown.
5.
When all Legs
are fixed, please fully tighten all
Bolts (A)
.
