EEI-3046 Sofa
Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 6
STEP 1:
Please take the compressed
Seat Cushions (7), Back Cushions (1)
, all Legs and hardwares bag from the
bottom of
Seat Frame (6)
.
Carefully remove plastic packaging of the compressed
Seat Cushions (7)
and
Back Cushions (1)
.
Being carefully not to cut through to them.
Place compressed
Seat Cushions (7)
and
Back Cushions (1)
on a flat surface in a well ventilated room and
allow 48 hours for expansion.
Due to the unique properties of the compressed
Seat Cushions (7)
and
Back Cushions (1)
, dimensions after
expansion will vary slightly; this is normal and will not affect the performance of your sofa.
STEP 2:
Please put
Seat Frame (6)
on a carpeted or padded surface.
Attach 1 piece of
Tilted Legs (8)
to the one corner of
Seat Frame (6)
by using 2 pieces of
Bolts (A)
with 2 pieces
of
Flat
Washers (B)
as shown. Repeat the same steps for the other 3 pieces of
Leg (8).
Tighten
Bolts (A)
by using
Allen Wrench (C)
fully as shown.
Hardware & Tools required
8
8
8
8
A
x 8
x 8
B
x 1
C
7
7
7
Carefully remove
plastic packaging
8
9
HA
RDW
ARE
INS
IDE
