EEI-2549
LEISURE CHAIR
A×4
B×4 C×4
A×4
B×4 C×4
STEP1:
STEP2:
Please take the seat off the
Chair Body (3)
and take the legs and hardware from package on the bottom of
Chair seat cushion. There are numbers shown on legs and each corner of the bottom of
Chair body (3)
.
Please match them correctly. Attention the label '' Insert bolt from this side'' on the legs and insert the legs at
correct side.
Insert 1 piece of
Front Leg (1)
with 2 pieces of
Bolt (A)
, 2 pieces of
Spring Washer (B)
, and 2 pieces of
Flat
Washer (C)
into the bottom of
Chair Body (3)
as shown. Repeat the same steps for other
Front Leg (1)
.
Do not fully tighten
Bolts (A)
for either leg.
Insert 1 piece of
Back Leg (2)
with 2 pieces of
Bolt (A)
, 2 pieces of
Spring Washer (B)
, and
2 pieces of
Flat Washer (C)
into the bottom of
Chair Body (3)
as shown.
Repeat the same steps for other Back Leg (2).
Do not fully tighten Bolts
(A) for either leg.
D×1
D×1
Legs Package
+
Hardware Package
(1)
(1)
insert
bolt from
this side
(1)
(2)
(1)
(2)
insert
bolt from
this side
