Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 3
EEI-2249
SUNBED
STEP 1:
Remove the plastic covers which pre-install in the end of side rail on the
Lounge Back(2)
by using
Allen Wrench (D)
.
Insert
Lounge Back (2)
into
Back Leg (3)
as shown by two adults.
Insert 2 pieces of
Bolt (B)
from the pre-drilled holes on the bottom of the
Lounge Back (2)
into
each side
on the bottom of
Back Leg (3)
.
Insert 2 pieces of
Bolt (C)
from the pre-drilled holes on the side rail of the
Lounge Back (2)
into
each end of
Back Leg (3)
as shown.
Use
Allen Wrench (D)
to tighten all the
Bolts (B&C),
do not fully tighten
Bolts (B&C)
at this step.
STEP 2:
Bx2
Cx2
Dx1
Hardware & Tool required
3
bottom of back leg
bottom of lounge back
3
2
2
Ax2
Bx2
Dx1
Hardware & Tool required
Insert assembled
Lounge Back (2)
into
Front Leg (1)
as show by two adults.
Insert 2 pieces of
Bolt (B)
from the pre-drilled hole on bottom of the
Lounge Back (2)
into
each side on the bottom of
Front Leg (3)
.
Insert 2 pieces of
Bolt (A)
from the pre-drilled hole on side rail of the
Lounge Back (2)
into
each end of
Front Leg (3)
as shown.
After checking the leveling for all connections, please use
Allen Wrench (D)
to tighten all
Bolts (A&B&C)
clockwise until secure
.
D
B
C
D
2
1
1
2
A
D
B
D
bottom of front leg
bottom of lounge back
