Customer Service 908-368-1025
︱
︱
︱
︱
www.modwayfurniture.com Page 2 of 2
EEI –2046
ROOM DIVIDER
STEP 1:
STEP 2:
Please put the Top Panel (1) upside down on a carpeted or padded surface.
Attach one piece of Divide Frame (5) into the bottom of Top Panel (1) by using 2 piece of Bolt (C) and 2 pieces of
Flat Washers (D) as shown.
Use Allen Wrench (G) to tighten the Bolts (C) clockwise until secure
.
Insert 2 pieces of Long Bolt (A) into the bottom of Top Panel (A) by hand as shown.
Ax2
Cx2
Dx2
Gx1
Hardware & Tool required
Cx2
Dx4
Ex2
Fx1
Gx1
Hardware & Tool required
1
5
A
C
G
A
C
5
D
Place 1 piece of Side Panel (3) to the bottom of Top Panel (1) through the 2 pieces of Long Bolt (A) as shown.
Attach 1 piece of Shelf (2) upside down to the Side Panel (3) and Divide Frame (5) by using 2 pieces of Nut (E) with
2 piece of Flat Washer (D) and 2 pieces of Bolt (C) with 2 pieces of Flat Washer (D) as shown.
Use Wrench (F) to tighten the Nuts (E) and Allen Wrench (G) to tighten the Bolts (C) clockwise until secure as shown
.
1
3
2
5
2
3
F
E
D
G
C
D
D
C
