EEI-1010/1011 SOFA
STEP 1:
Please put the
Sofa Body (3)
without
Back Cushion (1)
and
Seat Cushion (2)
upside down on a carpeted
or padded area by two adults to make the round metal plate on each corner and middle fully visible.
Open the Zipper on the bottom of
Sofa Body (3)
as shown, take out the packages of 4 pieces of
Corner
Legs (4)
and 1 piece of
Middle Leg (5)
, then close the Zipper on the bottom of
Sofa Body (3)
.
Take off the Black Protection Cover on the
Corner Legs (4)
and
Middle Leg (5)
.
Please insert the
Middle Leg (5)
into the hole on the round metal plate in the middle . Use hands to tighten the
Middle Leg (5)
clockwise until secure. Please insert 1 piece of
Corner Leg (4)
into the hole on the round
metal plate in the corner. Use hands to tighten the
Corner Leg (4)
clockwise until secure.
Repeat the same steps for other 3 pieces of
Corner Legs (4).
X5 PCS
STEP 2:
Carefully turn over the
Sofa Body (3)
and put on the
Back Cushions (1)
and
Seat Cushions (2)
.
Assembly is complete.The sofa is ready to enjoy now!
Customer Service 908-368-1025 I www.modwayfurniture.com
Page 2 of 2
Black Protection Cover
x 5PCS
Legs inside
