Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 3 of 4
EEI–2799/2800
BAR STOOL
STEP 3:
Put
Bar Stool Front (3)
to the assembled
Bar Stool Back (1)
,
Bar Stool Seat (2)
,
and
Stretchers (4)
as shown.
Insert 4 pieces of
Long Bolt (B)
with 4 pieces of
Flat Washer (C)
into the holes on
Bar Stool Front (3)
through the holes on
Bar Stool Seat (2)
.
Insert 4 pieces of
Short Bolt (A)
with 4 pieces of
Flat Washer (C)
into the holes on
Bar Stool Back (1)
through the holes on
Stretchers (4)
.
Use
Allen Wrench (D)
to tighten all the
Short Bolts (A)
and
Long Bolts (B)
. Do not fully tighten the
Bolts
(A&B)
at this step.
3
Bx4
Cx8
Dx1
Ax4
Hardware & Tool required
Carefully turn over the assembled Bar Stool.
Please put a heavy object or seat one adult on top of the assembled Bar Stool
to press the bar stool for leveling.
Use
Allen Wrench (D)
to tighten all the
Short Bolts (A)
and
Long Bolts (B)
clockwise until secure.
STEP 4:
Dx1
Hardware & Tool required
A
C
A
C
D
B
C
B
C
D
1
2
Assembly is complete. Your Bar Stool are ready to be used now!
