ASSEMBLY
a) Assemble the spikes and the 3” columns by screwing on a ring and
inserting a washer between the ring and the column. Screw a 2 1/2”
compression screw to the end of each of the 3” columns and slide a
washer onto the end of each screw.
b) Take a shelf and stand it upright on its longest side. Insert the first
two spike/column assemblies in the holes closest to the floor. The shelf
should be able to stand upright supported by the first two spikes. Put in
the two other spike/column assemblies and put the shelf on the floor,
resting on its four spikes.
c) Assemble four Allen head end screws by putting together an end ring
and a washer. Put each of these end screws in one of the four holes in the
shelf. (Hint) It is advisable to screw in the first two screws on a diagonal
angle. Insert the first screw through the shelf and put a washer on the
end of it, making sure to tighten it well under the surface of the shelf.
Screw in the screw only about a quarter of the way in order to leave
some play to insert the other three screws. Finish the operation
by tightening the four screws all the way -- and you’re done!
Spike only
Allen head screw
Recessed ring
Ring 1
Ring 2
Ring 1
Washer
Washer
Washer
Washer
3 in. post
Spike tip
Spike tip
Spike
Spike
Spike cup
Spike cup
Spike plus 3 in. column
© MODULUM 2016 All rights reserved
