SX-LF103
Weight 3.7kg
The fixture is for indoor use only in general conditions.
Can not be used following conditions (Causes of falling, electrocution and fire)
●Ambient temperature under 0℃ and over 35℃
●High humidity
●Outside
●On the floor
●Insulated inside of ceiling
20cm〜
10cm〜
●Vibrated or shocked areas
●Areas get direct sunlight
●Inclined, uneven surface
●Ceiling which canʼt hold the fixture weight
●On the wall
●Places affected by wind or air-conditioner machine
●Near fire
●Dusty areas, corrosive gas outbreaks areas
Before
installation
Warning
Caution
Please contact if you are not able to judge whether installation
environment is suitable to the places or not.
Insulator
Insulator
Insulator
To install the fixture safely《 Read carefully and follow all the instructions in the guide 》
Warning : Failure to install the fixture properly could result in personal injury.
Failure to install the fixture properly could result in property damage.
: Prohibited
: Strict observance
Caution :
Warning
Please follow the fixturesʼ indication or specification for the distance of irradiated area.
(Causes of change in shape, change in color of irradiated objects)
At lighting
fixture
installation
Caution
Make sure the construction will not affect any fire prevention systems such as sprinkler by heat from the fixture.
(Causes for improper operation)
Please follow the fixturesʼ instruction or this guide to install the fixture and lamp. (Causes of falling・electrification・fire)
Make sure to install all the parts of fixtures besides installation and mounting parts will not touch with any
objects both inside and outside of ceiling such as lighting track, etc. (Causes of falling・electrification・fire)
Do not dismount or remodel fixtures. (Cause of electrification・fire・falling・broken fixtures)
GRID TRIMLESS
hole dimension
for mounting
242×492
Conformity ceiling thickness
12.5
～
25mm
Fixture
(sold separately)
Frame
Channel bar
(Constructs Separately)
Ballast(sold separately)
Bracket
Box
Ceiling board
(Constructs Separately)
Punching metal
Installation Guide Mounting
To avoid hitting the punching metal,
please cut the channel bars.
(85mm from mounting frame.)
Screw standard
Installation Guide
Mounting
