ASSEMBLY AND INSTALLATION INSTRUCTIONS
CORNER TALL HANGING UNIT
10
11
10.1
10.2
Insert Camlocks (L) in holes in Set Shelves (E) and Upper and Lower Rear Hanging Cleats (F, G), with arrow
pointing toward Cam Post opening. Be sure Camlocks engage Cam Posts, and are fully seated in Shelves and
Cleats.
Tighten Camlocks (L) clockwise to lock.
L
L
L
L
E
E
G
ARROW TOWARD
CAM POST OPENING
INSTALLATION
STANDARD
HEIGHT
-
84" FROM
FLOOR
D
D
11.1
11.2
11.3
Determine the mounting location for the
unit.
Using a stud finder, locate studs to which
the unit will be secured. Mark stud
locations with a pencil.
With the unit positioned at the desired
location, level the unit, then drill pilot
holes through Upper and Lower Rear
Hanging Cleats (F, G).
STUDS
PILOT HOLES
G
G
H
H
