MODSTER EASY 1280 TRAINER, Руководство пользователя, Страница: 23 / 44

Manual MODSTER Easy Trainer 1280 V2
www.modster.at 23
1. Introduction
Thank you very much for choosing this product. It has been produced, tested and packaged with care in accordance with current European
regulations. Please unpack the contents carefully. Please check immediately upon receipt whether all parts included in the scope of delivery
are present and whether there is any transport damage. If there is cause for complaint, please contact us immediately.
2. Safety instructions
Please read all enclosed instructions carefully before assembly and first use!
You will receive important instructions for the use of the product. Keep these instructions for information or for ordering spare parts. If you are
operating remote-controlled model aircraft, helicopters, cars or boats for the first time, we recommend that you ask an experienced model
pilot for help.
Remote-controlled models are not toys and may only be used and operated by young people under 14 years of age under adult supervision.
Their construction and operation requires technical understanding, careful craftsmanship and safety-conscious behaviour. Errors or
negligence during construction, flying or driving can result in considerable damage to property or personal injury.
Since the manufacturer and seller have no influence on the proper construction and operation of the models, express reference is made to
these dangers and any liability is excluded. Propellers, rotors on helicopters, propellers on ships and generally all moving parts pose a constant
risk of injury. Avoid touching such parts at all costs.
Note that motors, regulators and exhaust systems can reach high temperatures during operation. Avoid touching such parts at all costs. Never
stay in the danger zone of propellers or rotating parts when electric motors with drive battery are connected. Also make sure that no other
objects come into contact with rotating parts!
ATTENTION: Protect your installation from dust, dirt and moisture.
ATTENTION: Do not expose the units to excessive heat, cold or vibration.
ATTENTION: Remote control operation may only be carried out within the specified temperature range.
ATTENTION: Use only recommended chargers and charge your batteries only up to the specified charging time and under supervision.
ATTENTION: Follow the instructions of the battery manufacturer. Overcharging or incorrect charging can cause the batteries to
explode. Also pay attention to the correct polarity.
ATTENTION: Always check your equipment for damage and replace defective ones with original spare parts..
Check glue joints and screw connection before each flight
ATTENTION: Do not use equipment that has been damaged by falling or has become wet, even if it is dry again!
Either have it checked at the service centre or replace it.
ATTENTION: Wet conditions or crashes can cause hidden faults that lead to a functional failure after a short period of operation.
ATTENTION: Only components and accessories recommended by us may be used.
ATTENTION: No modifications of any kind may be made to the remote control equipment.
ATTENTION: Never shorten the antenna cable on the receiver, you may lose control of your aircraft!
ATTENTION: Never attach the antenna cable to metallic objects or chrome-coated plastic parts or even shorten it, as this will result
a total loss of range!
ATTENTION: Allow all electronic components, especially controllers to cool down sufficiently after each flight.