MODSTER 285168, Руководство пользователя

Страница: 10 / 24

User Manual MODSTER M770
10 www.modster.at
8. Improper assembly may bring risks of loss of control, collision or fall-off. When assembling the scooter, use
appropriate force. Either screwing too tight or too light may cause damage to the e-scooter or malfunctions.
9. Never conduct assembly or repair with the power on.
10. Do not try to modify or reset the e-scooter by yourself or let any unauthorized party do the work.
11. Should any problem happen, feel free to contact us at any time. This is your most reliable choice.
12. Before riding, always make certain, that no abnormalities such as loose parts, damage or malfunctions exist
on e-scooter.
13. The front wheel is pneumatic, an improper inflation or tire pressure may lead to travel instability or easy
damage, even traffic accidents in extreme cases.
14. Make sure to measure the tire pressure at least once a month.
15. Remeasure it before you go on a long-distance ride.
16. Should you spot any loose part, damage, abnormality or malfunction during the use of your e-scooter, stop
using it immediately, and carry.
17. Prior to charging the e-scooter, make certain the charging port is dry and free from malfunctions and
objects. Only a correct receptacle (100V-240V/50HZ-60HZ) can be utilized for charging. When the e-scooter
is being charged, keep children and pets away. Make sure there are no infammable materials nearby.
18. Your e-scooter battery must be stored in environments with a temperature ranging from -20 to 45°C. Do
not place the e-scooter, where the temperature is over 45°C. When the ambient temperature falls below
-20°C, the battery will enter a self-locked state and can't be charged or used. If that happens, first bring the
e-scooter to a warmer place, to unlock the battery for charging and using.
19. In any case of leakage or other abnormalities (including breakage, emission of odd smell or smog, overheat,
etc.), stop using the product immediately and prevent the battery from contacting other objects.
20. Without permission, never try to open or dissemble the battery, or perform any irrational operations or use
it in an irrational way.
21. Depending on the battery state and environmental conditions, fully charged e-scooter (the display screen
showing 5 bars of power) will have a standby time of approximately 90 days. The non-fully charged e-scooter
(the display screen showing 1 bar of power) will have a standby time of about 30 days. Bear in mind, that
irreversible damage to the battery can be caused by failure to charge it in time. Do not store the Scooter
with empty battery after driving, charge battery before starting.
22. Do not wear high heels or other unsuitable shoes, too loose or other unfit clothes to ride the e-scooter and
always wear specialized protective gears, when riding the e-scooter.
23. When you are to ride yoour e-scooter, it's strongly recommended, that you wear a pair of safety goggles,
lest dirt, dust or insects harm your eyes or undermine your riding safety.
24. Never try to ride the e-scooter on rainy days or wet roads, for that may reduce the tires resistance and
lengthen the scooter's braking distance and may also lead to loss of control or other accidents by tire
skidding.
25. Use soft cloth to wipe and clean the e-scooter. Never try to fush it with powerful water jets or a high-
pressure hose, nor shall you immerse the e-scooter in water or else, such as uncontrollable malfunctions,
abnormalities or accidents may occur.