05
Propeller and spinner installation
1. Slide the auxiliary fuel tanks into the guide rails on the
wing structure.
2. Carefully apply foam-safe CA to the horizontal stabilizer
pass-through, then insert the two horizontal stabilizer
halves into their slots.
1.Carefully apply foam safe CA to the shown pocket and
place the two pieces of horizontal stabilizer into the pocket
as shown.
1. Assemble the propeller and spinner as shown .
a
b
c
d
Note:The motor should rotate clockwise when viewing
the plane from the rear.
Auxiliary fuel tank installation
Required Adhesives:
Medium CA
Horizontal stabilizer installation