Programming Guide
The master code comprises of a five-digit number and is used to access programming functions of the digital keypad and cannot be used for access i.e. It cannot be
the same as other PINs. The default master code is set to 12345. Under normal operation the keypad is used for entering PIN to gain access. In the programming mode,
the keypad can be used to add/delete PINs, set relay strike time and other operation functions.
1. ENTERING PROGRAMMING MODE:
• Enter the master code twice
1234 1234
to enter programming mode
(1 beep, rapid yellow LED flash).
• Press
#
to exit programming mode (If no data is entered within
50 seconds, the system will exit programming mode).
2. SETTING RELAY TIME:
The relay strike time determines the amount of time that the door
remains unlocked after a valid PIN is entered.
NOTE: Enter 00 will set the relay strike time to 0 second
(relay set to toggle mode)
1. Enter Programming Mode
2. Press
*
300
for Relay 1
(rapid green LED flash)
→
Enter 00~99 (1 beep, green LED stays on)
Press
*
400
for Relay 2
(rapid red LED flash)
→
Enter 00~99 (1 beep, red LED stays on)
3. Press
#
(1 beep) back to programming mode
4. Press
#
again (1 beep) back to standby mode
(slow yellow LED flash)
3. CLEAR MEMORY OF ALL PINs OF RELAY 1:
1. Enter Programming Mode
2. Press
*
888
(green LED stays on)
3. Press
00
(rapid green LED flash, 5 beeps)
4. Press
#
(1 beep) back to programming mode
5. Press
#
(1 beep) back to standby mode (slow yellow LED flash)
4. CLEAR MEMORY OF ALL PINs OF RELAY 2:
1. Enter Programming Mode
2. Press
*
999
(red LED stays on)
3. Press
00
(rapid red LED flash, 5 beeps)
4. Press
#
(1 beep) back to programming mode
5. Press
#
(1 beep) back to standby mode (slow yellow LED flash)
5. ADDING PINs TO RELAY 1
a:
1. Enter programming mode to select slot position
*
001 ~
*
200
(rapid green LED flashes to indicate the slot position is available)
2. Enter new PIN (1 beep, green LED stays on)
3. Press
#
(1 beep) back to programming mode
4. Press
#
(1 beep) back to standby mode (slow yellow LED flash)
b:
1. Enter programming mode to select slot position
*
001 ~
*
200
(green LED stays on to indicate the slot position is unavailable)
2. Press
00000
(1 beep) delete the data from the slot position
(rapid green LED flash)
3. Repeat steps of
5a
to add new PINs.
6. ADDING PINs TO RELAY 2
a:
1. Enter programming mode to select slot position
*
201 ~
*
210
(rapid red LED flashes to indicate the slot position is available)
2. Enter new PIN (1 beep, red LED stays on)
3. Press
#
(1 beep) back to programming mode
4. Press
#
(1 beep) back to standby mode (slow yellow LED flash)
b:
1. Enter programming mode to select slot position
*
201 ~
*
210
(red LED stays on to indicate the slot position is unavailable)
2. Press
00000
(1 beep) delete the data from the slot position
(rapid red LED flash)
3. Repeat steps of
6a
to add new PINs.
7. CHANGE MASTER CODE:
1. Enter Programming Mode
2. Press
*
000
+
1234
(4-digit master code) (1 beep, yellow LED Stays on).
3. Press
#
(1 beep) back to programming mode
4. Press
#
(1 beep) back to standby mode (slow yellow LED flash)
Additional Information
FEATURES
• Allows up to 200+10 PINs.
• 29-digit-code password protected design.
• Lockout for 60 seconds after entering 5 times invalid PINs (The keypad stays without beep sound during the period of time).
• 3 LED indicators & buzzer for status indication (Keypad with beep sound).
• Metal case & stainless steel panel with mechanical key lock designed for easy wiring and maintenance, enhanced safety, and durability.
• Weather resistance for outdoor applications.
• Additional input for anti-tailgating function to ensure high security access control.
• Non-volatile memory stores all code settings for a long time, even in the event of total power failure.
• Dual relays to control door lock and other security devices.
• Built-in tamper switch.
DETAILED SPECIFICATIONS
OPERATING VOLTAGE
12~24 VAC/DC
CURRENT DRAW
Holding: 22mA, Pull-In: 66mA@12VAC/DC
Holding: 12mA, Pull-In: 32mA@24VAC/DC
KEYPAD
4x3 matrix backlit 12-digit (0-9,
∗
, #)
INPUT
1 contact for Request-To-Exit button
1 contact for Door Reed Switch
OUTPUT
2 relays (N.O. / N.C. / Com. Dry Contacts)
RELAY ELECTRIC CURRENT
Max. 12A@14VDC, 7A@120VAC
MEMORY VOLUME
200+10 PINs
RELAY STRIKE TIME
01-99 seconds, Toggle mode (00)
LED STATUS INDICATION
3 LED indicators (red / yellow / green)
AMBIENT HUMIDITY
5%-95% (Non-condensing)
OPERATING TEMPERATURE
-20°C to +70°C ( -4 to +158 ˚F )
WARRANTY:
This product is warranted against defects in material and workmanship while used in
normal service for a period of 1 year from the date of sale to the original customer.
OUR QUALITY CAN’T BE MEASURED
®
© 2009 All Rights Reserved. Product specifications may change without notice. REV. 02-10
MAK-200
ACCESS KEYPAD
