Modern Lights LumaNumbers, Руководство по установке

Страница: 7 / 8

Finally, use a heat gun or hair dryer to seal the
joined wiring to lock the connections together,
which solders the wires together at the same
time. The remaining single gray and white wires
will be used to connect to the 12v DC power
source.
The gray wires will connect to +12v DC
and the white wires will connect to -12v DC. For
assistance, please contact a licensed electrician.
Secure the mounting plate to the wall using the
included screws. If your building exterior
material requires wall anchors, please source
and install these as they vary by material and are
not included.
Next, place the plastic caps on over the holes to
hide the screws and create nice clean
appearance.