6
Step 7:
Press the “PUSH” Power Button and the Smoothie Maker will start to
blend your ingredients. “Pulsing” the power ONand OFF generally gives the best
results
Step 8:
When you blended your ingredients to the desired consistency, switch off
the power at the wall socket and unplug.
Step 9:
Remove the Blending Bottle / Blending Head assembly from the Motor
Base by twisting anti-clockwise and then lifting it away.
Step 10:
Check your ingredients are properly blended. If not repeat Steps 5-8 as
required.
CAUTION:
Do not exceed the maximum continuous operating time.
Step 11:
Invert the Blending Bottle / Blending Head assembly and carefully
unscrew the Blending Head. If you want, you can now decant your smoothie into a
glass or take it away with you in the Blending Bottle by fitting the Travel Lid (4) as
shown in DIAGRAM C.
IMPORTANT!!
•
Do not fill the Blender Cups with HOT liquids or carbonated beverages.Build up
of pressure from released gases can cause the container to burst resulting in
possible injuries.
•
Do not operate the appliancewhen thecups areempty.
•
Do not operate the appliance for more than 1 minute continuously.Recommended
usage time is 1 minutes ON followed by 1 minute OFF.
WARNING!!
•
Always ensure the Blade Attachment is tightly and securely screwed on to the
Blender Cup beforeoperating the appliance.
•
Only operate the Smoothie Maker for as long as is needed to reach the right
consistency.
•
The blades are very sharp. Always handle the Blade Attachments with care.
•
Do not touch the blades with your hands as this may cause injuries. (Refer to
Fig.3)
7
Troubleshooting
Cleaning
• The appliance is always easier to clean if you do soimmediately after use.
• Do not use abrasive cleaning agents, scourers,acetone, alcohol, etc. to clean the
appliance.
• All detachable parts except the Motor Base and Power Cordcan be
washed in warm soapy water.
Step 1:Switch the appliance off, remove the plug from thewall socket and
wait until the motor / blades have stoppedrotating.
Step 2:If necessary, remove the Blending Bottle / Blending Head assemblyfrom the
Power Base.
Step 3: Remove the Blending Head.
Step 4: Wash all parts in warm soapy water then rinse.
Step 5:Dry thoroughly with a soft cloth.
WARNING:
The blades are sharp. Take great care when handling
them.
Step 6:Clean the base unit with a damp cloth.
Step 7:Store in a dry location out of the reach of children
WARNING:
Never immerse the Power Basein water or any other liquid,or rinse it
under the tap.
PROBLEM SOLUTION
The appliance does not work.
The appliance is fitted with a Safety Interlock
System. It will not operate if the Blending
Bottle / Blending Head assembly has not been
correctly assembled onto the Motor Base.
Switch off and check for correct assembly.
This is normal. It isjust manufacturing residues
burning off. If the smell persists, make sure
you are not overloading the Smoothie Maker.
There is a smell from the motor unit the
first few times the appliance is used.
Switch off immediately and contact your
Service Centre for advice.
There is a lot of noise when operating, a
strong smell or the unit is becoming
very hot.
Содержание 184833
Страница 7: ...Size 14 8x21cm 12...
