2
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
PREPARATION
1. Shut off the power at the circuit breaker and remove existing fixture, including the crossbar.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. Remove the mounting screws (C1) from the mounting back plate.
4. Connect the Driver’s input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1) are secured.
If your outlet box has a green or bare copper ground wire, connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s ground wire directly to the
back plate using the green screw provided. After wires are connected, tuck
them carefully inside the junction box.
*Requires Driver to be recessed within the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
5. Secure the mounting back plate to the junction box using junction box
screws (B1). The side of the mounting back plate marked “GND” must face out.
6. Insert the crystal onto the fixture, and then secure it with screw (D1).
7. Place the fixture over the mounting back plate and secure it with mounting
screws (C1).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2 Wiring
Mounting Screw
Crystal
(RPL-GLA-66734-01)
Screw
Wire Connector
Junction Box Screw
White Wire
Black Wire
Junction Box
Ground Wire
Driver
Mounting Back Plate
Black Wire
Red Wire
C1
D1
A1
B1
FIG. 1
INSTALLATION INSTRUCTION
667 - LED Outdoor
WS-66734
Back Plate Dimensions
4"
1
3/4
"
1
3/8
"
5
3/8
"