Modern Forms FR-W1814-60L-BZ/DW, Руководство по установке, Страница: 22 / 36

FR-W1814
Woody Instructions 22
8. Installing the LED Luminaire Module
WARNING: Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at fuse box.
NOTE: If you do not plan to install the luminaire module with your
fan at this time, skip this step.
1. Remove 1 of the 3 screws from the outer perimeter of the adapter
plate and keep it for future use. Loosen the other 2 screws
(Do not remove).
2. Raise and hold the LED luminaire module close to the
adapter plate and proceed to secure the wire connections.
Connect the white wire connectors from the luminaire module
to the white wire of the fan. Follow the same procedure with the
black wire connectors.
3. Tuck connections neatly into adapter plate. Place the luminaire
module key holes over the 2 screws previously loosened from
the adapter plate. Turn luminaire module until it locks in place at
the narrow section of the key holes. Secure by tightening the 2
screws previously loosened and the one previously removed.
4. Raise acrylic shade up against the luminaire module, and secure
it to fan by turning acrylic shade clockwise until snug. Do not
overtighten.
5. If installing the optional metal light cover, make sure it is
securely tightened.
NOTE: Add metal light cover if you do not need lighting function or
prefer a different aesthetic.
NOTE: Do not connect the LED connector wires if you are using the
metal light cover.