6
PREPARATION
1. Shut off the power at the circuit breaker.
2. Carefully unpack your Touch Panel wall
control and lay out all the parts on a clear area.
Be careful not to lose any small parts necessary
for installation.
5. Secure Mounting Bracket to the Junction Box using
Junction Box Screws (B).
6. Prepare Micro USB Cable as shown.
7. Install Touch Panel Wall Mount Case on Mounting
Bracket and secure with Lock Screws (C) (Fig.2).
Thread Micro USB Cable as shown in (Fig.1).
8. Place Metal Plate on the back of WIFI Touch Panel.
9. Plug Micro USB Cable into the WIFI Touch Panel.
10. Place WIFI Touch Panel in the Wall Mount Case
and close the cover.
11. Turn Power back on.
INSTALLING THE WALL BRACKET
MOUNTING THE TOUCH
PANEL WALL MOUNT CASE
3. Use Wire Connector (A) to connect 2-Pin
Receptacle to input White Wire and Black Wire
(Fig.1). Connect input ground wire to Mounting
Bracket’s Green Ground Wire.
4. Plug USB Charger into the 2-Pin Receptacle
and carefully tuck them into the Junction Box.
Содержание F-TS-BK
Страница 8: ...F TS modernforms com...