background image

3

USER INSTRUCTIONS

TABLE OF CONTENTS

When using electrical heaters, basic 

precautions should always be followed to 

reduce the risk of fire, electric shock and injury 

to persons, including the following:

1.  Read all instructions before installing or 

using this heater.

2.  This heater is hot when in use. To avoid 

burns, do not let bare skin touch hot 

surfaces. Keep combustible materials, 

such as furniture, pillows, bedding, papers, 

clothes, and curtains at least 3 feet (0.9m) 

from the front of the heater and keep them 

away from the sides and rear.

3.  Extreme caution is necessary when any 

heater is used by or near children or 

disabled people and whenever the heater is 

left operating and unattended.

4.  Do not operate any heater after it 

malfunctions, has been dropped, or 

damaged in any manner. Disconnect power 

at service panel and have heater inspected 

by an authorized technician or a reputable 

electrician before using.

5.  Do not use outdoors.

6. 

To disconnect heater, turn controls to off 

and turn off power to heater circuit at main 

disconnect panel.

7. 

Do not insert or allow foreign objects to 

enter any ventilation or exhaust opening as 

this may cause an electric shock or fire, or 

damage the heater.

8. 

To prevent a possible fire, do not block air 

intakes or exhaust in any manner.

9.  A heater has hot and arcing or sparking 

parts inside. Do not use it in areas where 

gasoline, paint or flammable vapors or 

liquids are used or stored.

10. Use this heater only as described in this 

manual. Any other use not recommended 

by the manufacturer may cause fire, electric 

shock or injury to persons.

11. SAVE THESE INSTRUCTIONS

WARNING: Improper installation, 

adjustment, alteration, service or 

maintenance can cause injury or property 

damage. Refer to this manual. For 

assistance or additional information, 

consult a qualified installer.

CAUTION: Do not expose the heater to the 

elements (such as rain, etc).

Do not place clothing or other flammable 

material on or near firebox. Never place 

any objects on the fireplace.

Carefully supervise young children when 

they are in the room with fireplace.

Fireplace becomes very hot when running. 

Keep children and adults away from 

hot surfaces to avoid burns or clothing 

ignition. Fireplace will remain hot for a 

time after shutdown. Allow surfaces to 

cool before touching.

CAUTION: In order to avoid 

overheating, do not cover the 

heater.

IMPORTANT INSTRUCTIONS

Important Instructions 

3

Power Data 

4

Product Guide 

4

Box Contents 

5

Installation 

6

Operation 

11

Service Parts 

12

Troubleshooting 

14

Frequently Asked Questions 

15

Cleaning and Maintenance Instructions 

16

Wiring Diagram 

16

4

USER INSTRUCTIONS

POWER DATA

PRODUCT GUIDE

LPM-4416/INT

LPM-5616/INT

LPM-6816/INT

LPM-8016/INT

Volts/HZ

Amps

AC 240V 60Hz 14 

Amps

AC 240V 60Hz 14 

Amps

AC 240V 60Hz 14 

Amps

AC 240V 60Hz 14 

Amps

Heater

AC 240V 3000W

AC 240V 3000W

AC 240V 3000W

AC 240V 3000W

Lamps

LED DC 12V

LED DC 12V

LED DC 12V

LED DC 12V

Rotor Motor

AC220-240V 

50/60Hz 4.5W 

18/15RPM CCW

AC220-240V 

50/60Hz 4.5W 

18/15RPM CCW

AC220-240V 

50/60Hz 4.5W 

18/15RPM CCW

AC220-240V 

50/60Hz 4.5W 

18/15RPM CCW

Shipping 

Size

1168mm x 686mm x 

343mm

1473mm x 686mm x 

343mm

1778mm x 686mm x 

343mm

2083 x 686mm x 

343mm

Model

Viewing Area

Firebox Dimensions

Framing Dimensions

LPM-4416/INT

1067mm W x 

394mm H

1118mm W x 632mm H x 

292mm D

1124mm W x 641mm H x 

305mm D

LPM-5616/INT

1372mm W x 

394mm H

1422mm W x 632mm H x 

292mm D

1429mm” W x 641mm H x 

305mm D

LPM-6816/INT

1676mm W x 

394mm H

1727mm W x 632mm H x 

292mm D

1734mm W x 641mm H x 

305mm D

LPM-8016/INT

1981mm W x 

394mm H

2032mm W x 632mm H x 

292mm D

2038mm W x 641mm H x 

305mm D

632mm

(all models)

Width varies (see chart below)

292mm

(all models)

Drywall stops

Drywall stops

Содержание Landscape Pro Multiview Series











Отзывы: