Modena Tiziano Series, Руководство пользователя

Страница: 15 / 28

14
-
Unbalance protection
When the machine is ready to spin, the washer may take a few time to balance the clothes. If the
clothes is still unbalance in the drum, the spinning speed will slow down to avoid vibration. If the
clothes in drum is only a few, the machine may not to spin due to the unbalance protection. You
should add more clothes into the machine to make it spin.
-
Time Display
The display will show the time needed for finishing one cycle program. The duration can be different
from the washing machine program, this condition can be caused by different water pressure,
temperature, water contents, the type and amount of the laundry, additional program chosen and
the voltage of power supply.
-
Start the washing program
For choosing the program please follow below steps:
1.
Connect the cable to power supply.
2.
Choose the program by rotating program knob..
3.
Adjust the spin speed and another additional program if it is wanted.
4.
Push START/PAUSE button to start program.
5.
The symbol related to program (start symbol, door lock, etc.) will be showed in the display.
Program progress
The progress and the temperature are shown on the lighted up indicator. Display shows the estimated
washing time.
Changing the washing program
In order to change the current washing program to a new washing program, you can follow these steps
below:
1.
Push and hold “START/PAUSE” button for 3 seconds to stop and cancel the previous program
(ex: “Cotton”)
2.
Rotate the program knob to the new program (ex: “Wool ”)
3.
Then push “START/PAUSE” button to start the program.
-
Adding or taking the laundry out.
If you want to add clothes in the washer during the process, press the “Start/Pause” button for 3s.
When you hear two beeps, it means the Reload feature has been activated. Please wait for the
indicator ‘ ’ to turn off, then open the door. Press the “Start/Pause” button to resume the
procedure after reload .