English
15
2.4 Special Notice
1.
This appliance is not applicable for home use.
2.
This product is a commercial machine that needs to be operated by trained cook.
3.
Do not sway or tilt the machine during operation.
4.
Do not dismantle or self-modify the machine.
5.
Dismantlement and self-modification may cause casualty.
6.
Do not open the casing of the machine.
7.
This product contains high-voltage circuit. Casing dismantlement may cause electric shock.
8.
Unplug and cut the power supply off before cleaning.
9.
Do not spray water directly onto the product during cleaning.
10. Water may conduct electricity, which may cause electric shock.
11. Do not pat the product or put any heavy objects onto it.
12. Abnormal operation may cause damage and danger.
13. High temperature may cause scald.
14. Do not touch the appliance with hands directly due to high temperature during or after operation.
15. To prevent from damages, turn the electric switch off as soon as possible when near the thunder
zone.
16. Do not destroy the control panel with hard or sharp objects.
17. After working, cut off the power supply.
18. All the maintenance work should be done by qualified personnel, otherwise it would be
dangerous for any other people to conduct maintenance.
19. If the supply cord is damaged, it should be substituted by the oil-resistant flexible sheathed cable
or special sets purchased from the manufacturer or its maintenance department and the
substitution work should be done by the manufacturer, its maintenance department or similar
professional personnel. Please contact MODENA Customer care.
1.
Before using, check that whether the power supply installation is normal and make sure the
power supply voltage corresponds to the working voltage of the appliance.
2.
After connecting the machine to the power supply, the indicator is on. Rotate the left speed
governing knob (COLOUR CONTROL) to “3” position. (Notice: The lighter the color is, the faster
the speed of chain movement is.) R
otate the right gear switch knob to “BREAD” position;
meanwhile, heating elements of upper and lower layer start heating simultaneously, the chamber
temperature rises gradually. If no bread in the chamber, the max temperature of midpoint in the
chamber can reach 284
℃
in 12min. Then, it keeps constant in 284
℃
generally.
3.
Before baking, please energize the appliance and preheat for about 10-12min. Then, try baking
with two pieces of bread to see the color degree so as to adjust the chain speed. To bake bread
with deeper color, please turn the knob clockwise from the color circle with deeper color to
position whose scale is larger than “3”. (Notice: The deeper the color of color circle and the larger
the scale value is, the slower the chain moving speed and the deeper the bread color is, and vice
versa.) After chain speed adjustment, put the bread on the chain via lead-in net rack, the bread
will be passed into the toaster to bake with the movement of chain.
4.
The baked bread will be turned to the lower food receiving tray and slide from the lower food
receiving tray to the front through the chamber bottom as indicated in Picture 4.
5.
A back food receiving tray is equipped at the back. If you want to take out the bread from back
side, press down the back slide board with handle at rear of furnace body to make the front of
slide board have contact with the pin near chain wheel. The baked bread will slide from the back
slide board to back food receiving tray as indicated in Picture 5. After the operation, hold the
handle to pull up the back slide board to reset.
6.
If baking steamed buns, rotate the right gear governing knob to “BUNS” position. The upper
heating element works only. If warming is required, rotate the knob to “STBY” position.
7.
When finish working, rotate the ge
ar governing knob to “OFF” position and unplug.
8.
To prevent pollution and performance damage of the appliance, do not use this toaster to bake
food whose surface has too much sugar or sticky food that will flow out after heating.
9.
If the power cord is damaged, please replace it with specialized cord or specialized component
bought from the manufacturer or maintenance department. Replacement should be operated by
professional personnel.
Part 3: Using Instructions
