English 12
Installing on concrete (brick) wall
1.
To install the hood in the wall, drill 4 holes on the wall and the diameter each holes is 8 mm, or
according to fisher size at the possible place based on the distance of the center of the back hole of the
hood.
2. Insert fisher/nut into the holes.
3. Pair the screw in the 2 above holes and leaving the 1 cm
distance from the wall.
4. Install the hood at the wall that already pair 2 screws by hange on the screws.
5. When the exhaust hood is positioned correctly on the wall, tighten both screws on the upper part .
6. To reinforce the exhaust hood handle on the wall, install the screws on both holes on the bottom part
and tight en them.
7. Connect the exhaust system with the spigot / flange if the exhaust hood is to be operated as a ducting /
exhaust system.
Installation on the bottom part of the kitchen set
1. Put the exhaust hood on the bottom part of the kitchen set in accordance with the planned position.
2. Mark the bottom part of the kitchen set for flexible pipe hole and then create a hole if the exhaust hood is
to be operat ed with ducting / exhaust system.
3. Install the exhaust hood with 4 screws on the prepared position.
4. To reinforce t he exhaust hood handle on the kitchen set, install the screws on other holes on the upper
part and tighten them.
5. Connect the exhaust system with t he s pigot / flange if the exhaust hood is to be operated as a ducting /
exhaust system
Installation on the bottom part of the kitchen set
1. Put the exhaust hood on the bottom part of the kitchen set in accordance with the planned position.
2. Mark the bottom part of the kitchen set for flexible pipe hole and then create a hole if the exhaust hood is
to be operat ed with ducting / exhaust system.
3. Install the exhaust hood with 4 screws on the prepared position.
4. To reinforce t he exhaust hood handle on the kitchen set, install the screws on other holes on the upper
part and tighten them.
5. Connect the exhaust system with the spigot / flange if the exhaust hood is to be operated as a ducting /
exhaust system.
Caution :
Before drilling, make sure that there's no cable
installation, wat er pipe and installation inside the wall.
