English
14
PRECAUTIONS FOR INSTALLATION
WARNING
Installation should be performed only by the dealer or a qualified expert. Attempting to install
the unit yourself could result in water leakage, refrigerant leakage, electrical shock, or fire.
Install the Showcase Cooler on even
and sturdy surface. Uneven surface
may cause objects in it to fall.
Provide
adequate
space
for
air
circulation between the Showcase
Cooler and the wall to minimize the
operational costs and to maximize the
compressor’s age.
Do not put the Showcase Cooler near
the heat source such as stove, hot
plates etc. And avoid placing unit
under direct sunlight which may hamper with
the cooling process.
Do not use the unit in an open
location, keep it away from sunlight
and exposed to rain water. Using
Showcase Cooler which has been exposed to
rainwater will result in electricity leakage.
Make sure the voltage is set to 220
volt and the frequency to 50 Hz. Do
not use cord extension or branched
outlet since it poses risks of shortage,
overheating and fire.
If the unit must be installed in a
humid environment, make sure to
install a circuit breaker to avoid
shortage.
