Modena Puro - VC 1350, Руководство пользователя

Страница: 17 / 20

English 21
-
Water/
used for water or liquid substance.
5. To use absorb water or liquid, make sure the motor filter cylinder is secured to the motor
housing and remove the dust bag. Indicator ball will not work when full of liquid inside the unit.
Dispose of the liquid when the fluid is full and switch off the power before. If the unit falls
should be inspected before use to make sure no water gets into the unit.
6.
After usage, turn off the vacuum cleaner by pressing the ON/OFF button and reroll
the power cord.
Always unplug the power cord from the outlet before performing maintenance on the
vacuum cleaner.
1.Remove the dust from the dust bag
a.
After releasing the flexible pipe, pull the clasp upwards to take off the motor housing.
b.
Remove the motor housing from the body and put it on an even
surface.
c.
Release the dust bag by pulling the collar bag from the air inlet
holder and clean the dust bag.
d.
If the dust bag is very dirty, clean the water and detergent
(specifically dust bag made of cloth).
e.
Tap the dust bag while submerging it in the detergent water then
rinse and lift it and dry it under a shelter. Do not squeeze the bag
to avoid compromising the dust bag material’s integrity.
f.
Reattach the plastic holder at the end of the dust bag. Reinstall the dust bag on the
body if the vacuum cleaner is to be used to clean the dust or folded and stored.
2. Cleaning the cylindrical filter
a.
Clean the cylindrical filter by rotating the holder
counterclockwise.
b.
If the cylindrical filter is very dirty, clean with water or
detergent. Tap the cylindrical filter while submerging it in the
detergent water then rinse and lift it and dry it under a
shelter. Do not squeeze the cylindrical filter to avoid
compromising the material’s integrity.
c.
When the cylindrical filter has dried out completely, reinstall
the cylindrical filter on the motor housing and install the holder by rotating it
clockwise.
3. Do not use shining powder, detergent powder, gasoline, acid, thinner, oil or hot
water to
Part 4 :
Maintenance
“When the dust bag and the cyllindrical filter are damaged, replace them to maintain
the efficiency of filtering function.”
-
Do not operate the vacuum cleaner without dust bag if the vacuum cleaner is
used to vacuum dust.
-
Do not use the dust bag if the vacuum cleaner is used to vacuum liquid
substances.