background image

 

 

 
 
 

For your  safety   

Do  not store or  use gasoline,  or  other  flammable  vapors  and  liquids near  the appliance.  
Instructions  to  be  followed  in  the  event  of  the  users  smell  gas  fumes  must  be  posted  in  a  prominent  location  in 
kitchen area.  The  instructions shall be  obtained  from  a local gas supplier.  

 

Warning

:  

 

Any self-modification,  wrong  installation, adjustment  or maintenance  can lead  ti properly  loss or casualty.  

 

Read  the  installation,  operating  and  maintenance  instructions  carefully  before  installing  or  repairing  this 
equipment. 

 

This  appliance  is intended  for  commercial  use only.

 

 

This  appliance  is  intended  to  prepare  food  for  human  consumption.  No  other  use  is  recommended  or 
authorized  by the manufacturer  or  agents. 

 

This  appliance  must be  handled  by 

authorized  technicians 

for  installing  gas-fired  equipment. 

 

Authorized  technicians 

must  perform  t he  init ial  s t art -up  and  adjus t ment   of  t he  applianc e.   The operator 

must be  familiar  with  the appliance  use, limitations  and  other  restrictions.  

 

Operating  instructions  must  be  read  and  understood  by  all  persons  using  or  installing  this  appliance. 
Cleanliness  of  this  appliance  is  important.  Read  and  follow  the  cleaning  instructions  and  schedules  to  ensure 
the  safety  of  the  food  product. 

 

DO  NOT  immerse  the  appliance  or  burners. 

 

DO  NOT  spray  the water  or  steam jet  directly  at this appliance.  

 

DO  NOT  splash  or  pour  water  to any  controls.  

 

DO  NOT  wash counter  around  this appliance  with  water  jet. Burners must be thoroughly dried  before  use. 

 

Burner  and  grate  surfaces will be very  hot when  in use. DO NOT  touch to avoid  injury. 

 

This appliance  must be operated with the supplied 4

” legs properly installed. 

 

DO  NOT  operate  this  appliance  if  the  smell  of  gas   occurs.  Turn  off  all  gas  supply  valves  and  move  to  a 
remote  location  and  contact MODENA  Call  Center. 

 

The  technical  content  of  this  manual,  including  any  parts  pictures  and/or  adjustment  procedures,  is  intended for 
use  by 

authorized  technician 

only. 

 

Any procedure  which requires the use of tools must be performed by 

authorized  technicians

 

Preserve  this  manual  safely.  When  passing  on/sellng  the  appliance  to  a  third  party,  the  manual  book  must 
be  handed  along  with  the  appliance.  All  users  operate  the  appliance  complying  with  the  manual  and  related 
safety  guidelines..

 

 

Unpacking & Inspection 

Carefully  remove  the  appliance  from  the  carton.  Remove  all  protective  plastic  film,  packing  materials  and 
accessories  from  the  appliance  before  performing  any  installation  procedure.  Carefully  read  all  instructions  in 
this manual  and  the Installation  Instruction  packed  with  the  appliance  before  starting  any  installation. 
Read  and  understand  all  labels  and  diagrams  attached  to the  appliance. 

Carefully  account  for  all  components  and  accessories  before  discarding  packing  materials.  Store  all  accessories 
in  a convenient  place for later use. 
 
Components:   

 

Adjustable Legs (set of 4)  

 

Grease Tray 

 

Setup 

This  appliance  is  intended  for  certain  type  of  gas.  If  you  want  to  switch  to  different  types  of  gases,  you  have  to 
change  the  nozzles  of  the  main  burner  and  adjust  the  regulator  valve  for  pilot.  Please  consult  the  authorized 
gas technician.  All modifications  must be  performed  by authorized  technician.

 

 

Part 2: Installation 

 

Содержание FT 6620G

















Отзывы: