English
11
Special Note
1. This product needs to be operated by trained cook.
2. Do not dismantle or self-modify the machine. Dismantlement and self-modification may cause
casualty.
3. Before cleaning, unplug and cut off the power supply.
4. During cleaning, do not aim at the appliance with water jet. Water may conduct electricity, that
may cause electric shock due to leakage.
5. Do not pat the product or put any heavy objects onto it. Abnormal operation may cause damage
and danger.
6. High temperature may cause scald. Do not touch the appliance with hands directly due to high
temperature during or after operation, especially the hot areas.
7. Do not use extra power supply that not marked on the product.
8. Do not use power knife that not conforming to safety standard.
9. To prevent damage, turn off the switch ASAP when near the thunder zone.
10. Do not destroy the surfaces of appliance and enamel hob with hard or sharp objects.
11. After working, turn off the switch.
12. Circuit installation and maintenance shall be done by qualified technicians.
13. If the power cord is damaged, to avoid hazard, substitution shall be done by Modena or its
maintenance department or similar professional personnel.
A. Transportation and Storage
During transportation, the machine should be carefully handled and do not put it upside down to
prevent from damaging to the shell and inside. The packaged machine should be stored in a
ventilated warehouse without corrosive gas. If it needs to be stored in open air temporarily,
measurement against raining is needed.
B. Notice for Installment
1. The supply voltage should comply with the working voltage of the appliance.
2. Before connecting the appliance to the power supply, an all-pole disconnecting device (residual
current circuit breaker) with contacts of 3mm should be connected.
3. The appliance is equipped with an earth bolt at its back, which should be connected with copper
wire no less than 1.5mm² and earth wire that conforming to safety regulations reliably.
4. Before installation, check that whether the connection is loose, whether the voltage is normal and
whether the safety grounding is reliable.
5. Vicinity of the mounting position should not store flammable or explosive objects..
6. Installation of the appliance should be done by professional technicians.
7. The appliance should be positioned at a stable area with a minimum clearance of 10cm away
from non-combustible substances (e.g. walls, windows etc.) on both sides, and 20cm at back
side.
Part 3: Installation
