9
Placement of the Oven
The product is arranged for the LPG. Use the product with a 300 mmSS
pressure expansion valve that is approved by TSE. Replace the
expansion valve and its pipe periodically.
Installation of the Gas Pipe
According to the location of the tube, choose the suitable location for
the pipe connection (see figure below). Place the clamp on the tube.
Soak one end of the tube in hot water for one minute to soften the
material and push it onto the fitting on the plate. Tighten the clamp with
a screwdriver. Do the same with the other end of the tube> connected
to the pipeline. Before turning on the stove, it is necessary to check the
connections for gas leaks.
Connect the product to a pipeline or tap on the natural gas supply line
with a short pipe. Its length should not exceed 125 cm.
INSTALLATION
