Modena DD 67 SUV, Руководство пользователя

Страница: 26 / 34

26
Installation
1. Before first use, leave the appliance for 1 hour to stabilize the
refrigerant
2. Install the pipe to the water bottle and install the cover to the bottle
tip.
3. Insert the bottle into the bottom cabinet and close the door
4. Plug the power cord into the power socket. Make sure that the power
source is properly grounded to prevent current leakage. Turn on the
switch in the back of the appliance
5. For first use, the inside of the appliance must be cleaned. Press the
hot and cold water button. Make sure the water is dispensed from
the tap. After the water is dispensed, wait for 20 minutes and remove
the water bottle from the cabinet and drain the water from the unit
by opening the drain water hole cover. Ensure that the power cord
is unplugged when draining the water.
6. If the water is empty, turn of the heating switch before replacing the
bottle with a new one
How to Use
Dispensing hot water:
1. Position the bottle, glass, pitcher, or cooking pot below the spout
2. Slide the child lock button while pressing the hot water button
3. Release the button once the desired level is achieved
Dispensing normal water:
1. Position the bottle, glass, pitcher, or cooking pot below the spout
2. Press the normal water button
3. Release the button once the desired level is achieved
Dispensing cold water:
1. Position the bottle, glass, pitcher, or cooking pot below the spout
2. Press the cold water button
3. Release the button once the desired level is achieved
PART 3: QUICK START GUIDE