
15
Ignition and fire control
Press ignition button to ignite the flame, the flame will burn in the biggest stage,
and LED display will show the number 5.
Stages according to the usage:
•
Stage 1: Reheating and heat-preserving
•
Stage 2: Cooking soup and stews
•
Stage 3: Steaming
•
Stage 4: Frying/Deep Frying
•
Stage 5: Stir-frying
Setting the Timer
•
When the burner has been lit, long press timer button
to enter timer setting
mode. The LED display will light up.
•
Press + and
–
button to adjust the time that shows up in the LED display.
•
Press the timer button
again to start the timer. The display will show the
stage of the burner and the timer alternately. When timer ends, flame will be
put out automatically and the buzzer will ring.
Overheat reminder
After the appliance is turned off, if the glass surface exceeds 50
℃
, the overheat
indicator will light up until the temperature is safe to touch. Pay attention to avoid
touching the glass panel if the indicator is on.
Auto-cutoff protection
If in the middle of cooking process there is a strong wind blowing that puts out the
fire, or spilled food that
causes the fire to burn abnormally, the protective device in the cooker will
automatically cut off the gas flow to prevent further combustion.
NOTE
The timer can be set between 1-199 minutes
Содержание BH 5725 LK
Страница 9: ...9 ...
Страница 26: ...11 21 PT MODENA INDONESIA Jl Industri Raya I Blok D 8 Jatiuwung Tangerang 15135 ...