January 2021
3
3.
That is what that funny looking refrigerator magnet is for! Simply
hold the magnet above the board about 2” max for 5-8 seconds.
Once the light blinks once, move the magnet away to let the board
complete it’s reset cycle (4 flashes confirm it is done).
4.
The lights will come on momentarily, turn off for about 5 seconds
and then flash when the reset is complete. After the lights go out,
wait about 2 seconds. The board address will be reset to Address 3
and the default brightness values will be reset to ~40%.
OPERATIONS:
FUNCTION KEYS F0-F4
F0 Turn on the lights to the default brightness. If this is a new board,
or you performed a RESET, the brightness will be 50%
F1 Force the brightness of the Main Lights to 100% regardless of the
default setting. This has no effect on the AUX lights.
