Modecom XINO PRO, Руководство пользователя

Страница: 17 / 58

www.modecom.eu
18
XINO PRO notebook
Low battery
When the battery life decreases to around 10%, the Notebook PC will beep every 16
seconds as an alarm, and at the same time the orange indicator blinks. You should
save all work as soon as possible to avoid damage or loss of data. When the power
decreases to around 3%, the Notebook PC will be into standby mode, if the power ex-
hausted, the notebook PC will shut down automatically.
Note Low battery alarms can be confi gured in the Power Management settings within
the Windows operating system. The run time remaining when running on battery de-
pends on the work status of your Notebook PC. If you are running the audio functions,
WLAN, or HDD, then the battery may run down quicker.
Important Data will be lost if it is not saved before the battery runs out. If you are us-
ing a Compact Flash card, please do not read the card when there is little battery life
remaining as the power may run out before the reading process fi nishes.
Please run battery learning regularly.Please See also in chapter 2 battery learning.
POWER MANAGEMENT
Your Notebook PC supports the ACPI (Advanced Confi guration and Power Interface)
power management modes.
In ACPI mode, the components of your Notebook PC consume power depending on
the practical requirements so that the system can get both power-saving and high
performance at the same time.
In Windows, you can setup the operation in Power Management of the Control Panel.
The operation is:
Result Case
Shut down the hard disk System is inactive for a set period of time
Shut down the screen System is inactive for a set period of time
System standby: both the
hard disk and the screen
will be shut down to con-
serve energy.
System is inactive for a set period of time
Lid is closed*
Press Fn+Esc*
Press power button*
Shut down the hard disk
System is inactive for a set period of time
Lid is closed*
Press Fn+Esc*
Press power button*
Note * Depending on Power Management Confi guration within Windows. For more in-
formation about Power Management please refer to the On-line help of Windows.
Hibernation
Hibernation is a very useful function. When using the Notebook PC, you may run more
than one program or open more than one fi le at the same time. Before powering off ,
you need to shut them down one by one. It will take some time to re-open these pro-
grams and fi les when you turn on your Notebook PC next time. When you use the hi-
bernation function, all data in use will be stored for hibernation in a special fi le on the
hard disk before the Notebook PC is automatically shut down. When you turn on the
Notebook PC next time, it will read the data from this special fi le and will resume to the
status of which was at before being powered off .
Tips for power-saving
Besides the automatic power-saving function of the Notebook PC, you can also follow
the following suggestions to save power.
Enable Power Management.
Decrease the screen brightness as much as is unable. If a program needs to run the