Original instruction notice
5
NOT-MC89-EN-2020-v1
Keep the contacts on the machine, charger and battery pack clean.
Don’t open the battery. Risk of short-circuiting.
Protect the battery from heat, for example direct exposure to the sun, to fire, to water and to
humidity. There is a risk of explosion.
In case of damage or non-conforming use of the battery, vapors could escape. Ventilate the work
place and consult a doctor if you feel unwell.
a.
Transporting the actuator
Keep the original casing for return in case of any revisions or repairs.
When packing, make sure that all switches are off and without any constraints.
Always pack the tools in the correct spaces to avoid them knocking against each other.
Replace the batteries in their allotted casing.
Lithium-ion batteries are subject to rules regulating the transport of dangerous materials. The operator can transport
the batteries by road without taking any additional measures.
When transporting via a third party (for example, by air or a via a transport company), you must conform to the
specific measures regarding packaging and labelling. In such a case, it is imperative to take advice from an expert
in the transport of dangerous materials when preparing the transportation. Only send the batteries if the packaging
is not damaged. Recover any unprotected contacts? and pack the batteries tightly so they cannot move about.
Please also follow any additional regulations that may apply.
b.
Storing the actuator
modec
actuators must be stored in a dry and correctly ventilated environment to ensure there is no corrosion of the
internal mechanic parts.
c.
Protecting the environment
To eliminate waste, conform to the stated national requirements. The actuators and their
accessories must not be thrown in a waste bin. Make sure you dispose of the tools in specialist
recycling centers.
