Instruction notice (EN)
10
NOT-JA73-EN-2021-v01
1.
Handle position
The smart control handle can be oriented in different positions so that the reading on the screen is always easy. To do so,
press the handle (picture 1) and rotate it as shown on picture 2 until you get the required position and release it (picture 3).
2.
Switch ON/OFF
ON : Switch on the battery
The screen lights up and displays all the elements.
After 1 sec. “ON” appears and “MODEC” scrolls at the bottom of the screen.
After 3 sec. “ON” remains and the battery type appears at the bottom of the screen
After 4.5 sec. the actuator goes into “lock” mode (a small locker appears at the bottom right
of the screen) and “1 x CLICK TO START” scrolls at the bottom of the screen.
OFF : Press 5 seconds on the power button (1)
The screen displays “OFF” and a count down from 3 to 0 appears at the bottom of the screen
3.
Unlocking the actuator
To unlock the actuator, press the safety trigger (2) and click on the throttle button (3).
Once the actuator is unlocked, the “Home” screen displays the following information:
« Eco » mode (always visible if power 1 or 2 is engaged)
Battery charge (always visible):
Steady : > 20%
Slow flashing : < 20%
Fast flashing : < 10%
Battery charge (visible in Home screen only)
Rotation direction (D1/D2) (always visible)
Power level (1 to 4) (always visible)
4.
Changing the rotation direction
From the “Home” screen (actuator unlocked) :
Press the “Power” button (1) once.
The screen displays the rotation direction “D1” (CW)
and “0 – ROTATION DIRECTION” scrolls at the bottom of the screen.
Keep the “Power button” pressed 3s to modify direction:
D1 (Clockwise) will flash and turn into D2 (Counter clockwise)
or
D2 (Counter clockwise) will flash and turn into D1 (Clockwise)
Press the safety trigger (2) and press the throttle (3) once to return to the “Home” screen.
You can also press the Power selection trigger (4) to return to the ‘Home” screen.
Picture 1
Picture 2
Picture 3
MODEC
1
