Accessory Installation Instruction
630497_1
KWU for KS1150 Model
2 x M4 Nut
2 x M4 Washer
1
8.1
Flue out from the back or the bottom -use position 1.
Flue
Flue
Flue
8.2
Flue out from the top - use position 2.
2
400
400
400
180
712
Wall lining Fixing holes
60
60
707
Wall lining Fixing holes
Access Hatches
The wall lining fixing holes in the top of the KWU can be used for fixing plasterboard or wall cladding with
either screws or construction adhesive glue. The access panels may be clad over; they do not need to remain
accessible for service.
Recommended plasterboard screws: Scavenger Head/Bugle Head High Thread plasterboard screws, Size: 6
x (50mm MAX.)
WARNING: The maximum load supported by the KWU is 500kg. The attached wall cannot exceed this.
2 x M4 Nut
2 x M4 Washer
The top plate on the KWU can sit in one of two positions depending on the required flue position. Position 1
covers the entire opening on the top; position 2 covers half the opening with the plate sliding partway under.
