B
A
C
D
E
F
G
SER
VICE
7
B
Creating the Cavity
B1 Cavity Shape
The KS1460 Single/Double is suitable for self supporting timber or steel framed cavities. Most existing
masonry cavities will not be suitable.
B2 Designing the Cavity
The following aspects must be considered when designing this installation:
•
Appliance physical size
•
Single or Double sided appliance
•
Wall finishing and interaction with appliance
•
Positioning of appliance in regards to wall lining (depth into wall)
•
Exhaust termination aspect – horizontal/vertical and flue configuration
•
Flue exhaust fan noise
•
Exhaust cowl access for maintenance
•
Gas pipe layout
•
Gas isolation valve / pressure test point position
•
Electrical isolation switch
•
Home automation network connections - ethernet cable layout
The cavity and wall linings may be constructed from standard timber framing materials and do not need
to be non-combustible.
It is not necessary to line the sides or back of the cavity.
This KS Series fires are to be installed prior to any wall lining.
The wall lining is the very last task to be completed in this installation.
