MODE 3100-L-6060 Скачать руководство пользователя страница 6

CARE AND MAINTENANCE

1) AFTER CARE INSTRUCTIONS

The supplier accepts no liability for any type of use of care other than those contained in this

instruction. The supplier reserves the right to introduce technical changes without notice.

It is recommended that mirrors are cleaned with a soft, dry, non-abrasive cloth. Do not use

abrasive cleaning materials, or chemical cleaners as this will damage the mirror surface

2) MAINTENANCE

It must be disposed of in a safe and environmentally friendly way.

We suggest you take it to the local landfill site and discard it in the designated bins.

The packaging you have received with your product is 100% recyclable.

COMMITMENT TO QUALITY

understand that this may not always be the case. So should you experience any problems,

please contact our customer services quoting the following:

It is our intention that the quality and functions of this product are of the highest standard.

If you require help, we advise you firstly contact a qualified electrician. However we

Product name: Rectangular LED Mirrors

Customer help line number: 0344 804 48 48

Product code: As shown on the first page

NOTE:

and edges.

V01.09.2017

Содержание 3100-L-6060







Отзывы: