Step 3
Ensure that espresso module is displaying the correct pump pressure.
Ensure that module is putting out an accurate volume by switching profile to lineaesque. Start by
tapping the profiles icon in the settings screen.
Use the encoder knob or press "lineaesque" then save and exit. Brew into a vessel and measure
the output volume. Should be between 500-650 grams or ml.
Step 4
Inspect module inside and out for leaks that may occur at pump, manifold, boilers, pressure
transmitter, 3-way valve, flowmeter inlet and outlet ports and external fittings.
Inspect tap and drain hosing to ensure there is a proper slope with no dips/valleys that could
potentially affect volumetrics. Look for proper drainage after shot extraction.
EP Espresso Preventative Maintenance- …
2019-04-04
[minor]
espresso ep pm rev…
Release:
Guide ID: 55 -
This document was generated on 2020-02-03 10:34:49 AM (MST).
© 2020
modbar.dozuki.com/
Page 5 of 7
