42
43
Controller Page
This page provides a MIDI controller for playing your SKULPT synthesiser with 16 assignable
macro controls.
You can select the number of octaves of playable on screen keyboard has using the 3, 2 or 1
buttons.
Below this is the Keyboard section where you can access pitch bend, modwheel, transpose,
chord on / off & set as well as Arp and Sustain on / off as mentioned above.
You will find the complete arpeggiator (and some sequencer) options to the right of here as
well as a quick access macro bank of 16 configureable encoder.
Arpeggiator section - Here you can set the note division (1/32, 1/24, 1/16, 1/12, 1/8, 1/6, 1/4
or 1/2), direction conditions (Fwd, Back, Pend or Note) the octave range of the arpeggiator
(1oct, 2oct, 3oct, 4oct)
Global Arp & Sequencer options - Here you can toggle play and record of the sequencer as
well as set the swing amount and tempo using either the tap tempo button or tempo slider.
Sequencer Page
Here you can access the complete sequencer and animation options as well as the global
arpeggiator and sequencer options from the previous page.
You have an animator grid that you can click and drag across to draw. The Animator is
basically another Sequencer for parameters: when running, each sequence will run thru its
own animation cycle.
You can select which of the 4 animation rows you are looking at, record enable that row,
choose it’s destination and clear it’s contents. To the right of this you can clear the sequences
notes, toggle mute, hold and loop and select the length of the sequence.
You also retain the Keyboard, global Arp & Sequencer options, playable keyboard on this tab.
