Modal CRAFTrhythm, Руководство пользователя

Страница: 13 / 28

24 25
Seq Input
CRAFTrhythm has an 8 track 16 step fixed grid sequencer for programming your beats. These
beats can be saved as patterns into one of the 16 slots available.
Pattern Loading, Saving and Chaining
See Preset section.
Input Steps
To input steps on the sequencer grid first select the desired track by holding the track touch
pad and pressing the “SELECT” button. Alternatively, holding the track touch pad will
temporarily select the held instrument’s row and will revert back to the selected row after a
short delay when the touch pad is released. Holding the touch pad 1 and the touch pad 8
together will temporarily select all tracks so that global track changes can be made.
Then once the desired track is selected you can input steps for the tracks by using the buttons
1-16 to enable or disable steps. The step status is indicated by the LED above the button.
Alternatively, you can input steps live by holding down the “PLAY/INPUT” touch pad and using
the track touch pads to input steps while the sequence is playing.
When the “PLAY/INPUT” pad is held down there is a metronome that will help you play in
time! The metronome can be disabled using the CRAFTapp.
Mute, Solo + Clear
Mute
CRAFTrhythm allows you to quickly mute tracks to instantly bring them in and out of the
pattern.
To mute rows hold “PLAY” and press buttons 1-8.
An led indicator is shown when the button is pressed to show the current mute status of each
of the 8 tracks.
This led indicator disappears after a short time of inactivity.
Solo
Soloing a track will make that track the only one that is currently active.
To solo rows hold “PLAY” and press buttons 9-16.
An led indicator is shown when the button is pressed to show the current solo status of each
of the 8 tracks.
This led indicator disappears after a short time of inactivity.
Clear
Often it is useful to clear an entire row or pattern of steps so that you can start again.
To clear a row, hold “SHIFT” and then press the “SELECT” button.
Holding “SHIFT” and then and pressing and holding the “SELECT” button will clear the whole
pattern.