7
Please note that each terminal has been numbered as illustrated here
and will be referred to as a terminal #_ when connecting different
components and wires throughout the assembly instructions.
1
2
3
4
5
6
7
8
10
9
11
12
13
14
15
16
17
18
19
20
21
22
NC
Suggestion: 3 wires/components will be connected to terminal #15. Consider connecting to the lower terminal holes.
Strip and tin a 2" piece of wire and connect footswitch lug 5 to the
output jack's tip lug.
Strip and tin a 1 ½" piece of wire and connect footswitch lugs 1 and 4.
Strip and tin a 2" piece of wire and connect footswitch lug 2 to the input
jack's tip lug.
Strip and tin a 4" piece of wire and connect footswitch lug 6 to 250K pot lug 2.
Strip and tin a 1 ½" piece of wire and connect footswitch lug 3 and terminal #2.
Strip and tin a 3" piece of wire and connect terminal #6 to #15.
Strip and tin a 2 ½" piece of wire and connect terminal
#3 and 1K pot lug 1.
Strip and tin a 1" piece of wire and connect terminal
#15 to the power jack's "positive" lug.
CENTER-PIN LUG
POSITIVE-SWITCH LUG
POSITIVE LUG
Strip and tin a 1 ½" piece of wire and connect terminal #5 to #7.
Suggestion: 4 wires/components will be connected to terminal #5. Consider connecting to the lower terminal holes.
Strip and tin a 1" piece of wire and connect terminal #13 to #22.
Do not solder at #13, yet.
Suggestion: 3 wires/components will be connected to terminal #13. Consider connecting to the lower terminal holes.
Strip and tin a 1 ½" piece of wire and connect terminal #16 and 1K pot lug 3.
Strip and tin a 1 ½" piece of wire and connect terminal #20 and 250K pot lug 3.
Strip and tin a 3" piece of wire and connect terminal #12 to #19.
Do not solder at #19, yet.
Suggestion: 3 or more wires/components will be connected to both terminals. Consider connecting to the lower terminal holes.
Strip and tin a 1 ½" piece of wire and connect terminal #18 to #19.
Now solder at #19.
Strip and tin a 1 ½" piece of wire and connect terminal #11 to #13.
Now solder at #13.
Suggestion: 3 or more wires/components will be connected to both terminals. Consider connecting to the lower terminal holes.
Strip and tin a 1" piece of wire and connect terminal #11 to #21.
Strip and tin a 1 ½" piece of wire and connect the input jack's sleeve lug to terminal #1.
Strip about ¾" of insulation off one end of the remaining wire. Twist and tin this end. When cool, cut off
this piece of wire. Connect one end to the power jack's center-pin lug and the other end to terminal #1.
Strip about 1" of insulation off one end of the remaining wire. Twist and tin this end. When cool, cut off
this piece of wire. Connect one end to the output jack's sleeve lug and the other end to terminal #8.