Mocreo VIEOCAST, Быстрый старт

Страница: 2 / 2

For Android 4.2+ Miracast enabled devices, such as Samsung Galaxy S4/Nexus
4/Nexus 7/Sony Xperia/LG Optimus G Pro, please turn on your smart phone or
tablet PC
and swipe down the Notication Bar on the top, then nd the icons
“ Miracast ”. (or “ Screen Mirroring ” for Samsung phones) Wait a moment until
your smart phone or tablet PC shows a device found: LOLLIPOP-XXXXX, then click
“ Yes ” or “ Accept ” button. After that, your smart phone or tablet PC will show
”Connected”, so that your phone or tablet has been connected with the device.
Then they can be interactive.
Some other phones may refer to the following instructions:
Turn on “Settings” >> “Display” >> “WLAN Display”
Search for
LOLLIPOP-XXXXX . Click it and then “ Accept ”
Then your phone will show “Connected”
Press the button on the side of device to switch the mode between Miracast / WiFi
Display and DLNA / AirPlay Mode, until you see a “Mode: DLNA” on the TV screen.
Now the MOCREO VIEOCAST device will function as a WiFi Access Point (AP).
Use your smart phone or tablet PC connects to the device AP, which SSID is the
Device Name:
LOLLIPOP-XXXXX (Refer to the TV screenshot below).The default
password is:12345678 .
Now we need to make the Dongle device connect to your home/ofce routers, so
that your phone and Dongle device may access the Internet in the same time.
- DLNA/AirPlay Mode:
Device Name: LOLLIPOP-28056
Status: Waiting for connection...
Mode: DLNA
Device IP0: 192.168.49.1
AP SSID:
Device IP1:
Your VIEOCAST (#1) plugs into any HDMI port on your TV, and uses your existing
WiFi network to stream VIEOCAST from the internet to your TV.
A VIEOCAST is controlled from devices on the same Wi-Fi network, such as smart
phones, tablets, or computers, and is powered using the USB cable (#2).
Overview
VIEOCAST
HDMI
Mode Switch
Micro USB/
Changing
VIEOCAST
HDMI extender (Sold Separately)
The HDMI extender is opitional,and can be used if your VIEOCAST does not t
directly into your TV, it may also be used to improve your Wi-Fi reception. Attach
between your
VIEOCAST and TV.
How to use MOCREO™ Vieocast Dongle
Insert the device ( MOCREO™ VIEOCAST Dongle ) into HDMI port, at the same
time please connect this device with a power supply ( you can use the Micro USB
cable connecting the TV USB interface). If your TV has no USB interface, a 5V/1A
power adapter is suitable for power supply.
- Miracast / WiFi Display Mode:
Turn on your TV, you will see
“Status: Waiting for connection…
Mode: Miracast” on the screen.
Device Name: LOLLIPOP-28056
Status: Waiting for connection...
Mode: Miracast
Peer Device Name:
Peer Device MAC:
Peer Device IP:
1.
2.
3.
1.
2.
3.
Enter the IP address “ 192.168.49.1 ” (i.e. the Device IP0, as seen on TV) into your
phone's browser, then click [Scan] to enter into the Wi-Fi AP list screen (as shown
below). Choose a Wi-Fi hotspot available in your home/ofce, then enter the Wi-Fi
password and [Connect].
4.