7
6
5
4
3
Trim
Panel
(Not Included)
Determine the panel size. Place the trim on both
sides of the panel. (Note: Cut excess trim if
necessary.)
Panel
bracket
Opening
Remove the cap on top of the panel bracket.
Align the panel bracket opening to the trim on
both sides of the panel.
Set screw
Cap
Use the set screw to install the cap on top of the
panel bracket. Repeat this step for the other cap.
Determine the position and location of the
assembly on top of the work surface.
Wood screw
Secure the assembly by using (3) wood screws
for each base. Repeat this step for the other base.
8
Mark the mounting holes from the base on the
work surface. Drill pilot holes for the mounting
screws.
1/8" DIA.
Pilot holes
2021.03.15
2
