Oska Buffet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
14
13
Attach hinges on panels [13] and [14] to the unit using 16x screws (H).
Tighten with a screwdriver. Ensure the doors open and close easily. If
the cover (N) is not catching on the seal (O), adjust the magnetic end
by twisting it outwards.
Attach 8x wedges (I) into the corners of the back of the unit and
secure with 8x screws (J). Tighten with a screwdriver. Attach 1x
safety strap (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
H
H
V
Z
W
J
I
V
Z
W
1
H
13
14
8
9
8
9
N
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
