Mocka Neva Cot Скачать руководство пользователя страница 3

Страница: 3 / 4

Neva Cot

Attach panels [3] and [4] to assembled frame as shown and secure with

12 x long screws (B), 6 x bolts (E) and 6 x locking nuts (F). Tighten with

an Allen Key (D) and a scewdriver. Move the unit into the desired

location. You’re done, enjoy!

All done! Regularly check all screws are suitably tightened. Place the

correct sie mattress into the cot before use. To clean use a damp cloth,

avoiding the use of detergents or abrasives. Once assembled lift

furniture into place, do not drag.

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Содержание Neva Cot

Страница 1: ...300mm long x mm wide x 100mm in thickness The width and length are specified because it is important that gaps between the mattress and the sides and ends of the cot will not exceed 40mm This is to mi...

Страница 2: ...nz mocka com au PO BOX 6171 Maroochydore BC QLD 4558 Attach panels 1 to panel 2 and secure with 8 x screws A and 4 x washer G Tighten with an Allen Key D 1 1 2 A G G G G G A A A Attach panels 1 to pan...

Страница 3: ...unit into the desired location You re done enjoy 3 3 4 All done Regularly check all screws are suitably tightened Place the correct sie mattress into the cot before use To clean use a damp cloth avoi...

Страница 4: ...Neva Cot OPTIONAL To adjust mattress base setting repeat steps 2 and 3 by removing the side panel unscrewing screw A and move the base to the corresponding holes Securely fasten again in the adjusted...