13
14
Attach door panels [13] and [14] to the main unit as shown, using 2x
small screws (F) to secure each hinge (E). Tighten with a screwdriver.
13
14
13
14
F
F
Attach 2x hinges (E) to panel [13] as shown and secure with 4x small
screws (F). Attach 2x hinges (E) to panel [14] and secure with 4x small
screws (F). Tighten with a screwdriver. Repeat this step to assemble the
remaining two doors.
13
F
F
F
F
E
E
14
F F
F F
E
E
Doors x4
NOTE: If the doors
are uneven or
there is a gap in
the middle, loosen
or tighten the
screw on the door
hinge until they are
sitting flush.
F
F
15
16
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V). Fasten
to wall using 1x wall plug (X), 1x washer (Z) and 1x screw (Y). Ensure
unit is balanced and steady before use. You’re done, enjoy!
9
1
X
Y
Z
wall
plug
screw
strap
washer
Wall Strap
Attach 4x wedges (K) to the corners of the panel [9] and secure with 4x
screws (L). Attach 1x safety strap (V) to the back edge of panel [1] using
1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
1
V
W
Z
screw
strap
washer
K
L
K
L
K
L
9
Chelsea Cabinet
Assembly Instructions
9
mocka.co.nz | mocka.com.au
