Phillips & Flathead screwdrivers and hammer required
Brooklyn Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
mocka.co.nz | mocka.com.au
B
A
C
D
E
F
G
H
12 mm
30 mm
12 mm
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
WARNING:
Any furniture that is not anchored to a wall has the potential
to tip over in certain circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake. Accordingly, we
recommend that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device provided should
fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
WARNING:
Never leave a child unattended on the change table.
bolt
x28
locking
nut x28
dowel
x40
small
screw x20
I
cover
x 4
L + R
slide rail
x4
L + R
slide rail
x4
long
screw x 8
screw
x22
