1
2
Attach the legs (H) and (I) to the seat (G) using 4x screws (B), 4x spring
washers (C) and 4x flat washers (D). Tighten with the allen key (A).
Attach 2x wedges (E) between the legs as shown and secure with 8x
screws (F). Tighten with a screwdriver. Carefully turn the chair over onto
its legs, ensuring it is balanced and steady before use. You’re done,
enjoy!
B
C
D
A
F
x2
E
G
I
H
G
Adele Chair
2
mocka.co.nz | mocka.com.au
Assembly Instructions
Please note that there are no pilot holes on the legs, but wedges
are to sit flush as shown. Just put the screw in and start turning
and it will find where it needs to go, or use a drill if you have one
handy.
